Printable Degree Wheel

Attach Degree Wheel To Crankshaft And Install Pointer.

For street applications, steel retainers with stock 7 degree locks are usually recommended. Some aftermarket suppliers have responded to the changing market conditions by introducing new lightweight steel retainers. A positive stop to find tdc. Use some method of locking your timing gear to the cam

Discover What's Exact In My 410 Sbc My Late Friend Bill Built Just Said Its A Radical Cam.

Printable degree wheel for ecu/megajolt etc 13 minutes ago If you plan on graphing the lift vs cam lobe rotation per degree of rotation, you can safely ignore, totally the lifter seat being held up on a running engine, when your using a lifter and push rod too move, and verify a dial indicator reading, (keep in mind the cam rotates at 1/2 the crank rotation speed.) when checking the cam lobe lift and duration.as the cam rotates it. The dial indicator ideally needs an extension on it that’s long enough to reach the lifters. Pen & paper to record your readings 2.

Dial Indicator Can Be Used In Several Configurations Such As A Magnetic Base Or A U Shaped Bracket To Position Indicator Over The Cylinder.

The bare minimum of tools necessary to degree in a camshaft will include a degree wheel and a dial indicator capable of measuring up to 1.000”. Adjust pointer to approximate tdc on the wheel with piston at top. But for racing or high rpm roller cams, titanium retainers with 7 or 10 degree locks can reduce weight.